Repair Kingstone, PQI, Transcend, U3 Pendrive

Error handling, when the pendrive is damaged. Error handling when pendrive damaged, including the biggest factor, which is more fatal damage on the pendrive. When pendrive damaged, there are some features: pendrive RAW format, the format is unknown, Used sapace = 0, free space = 0, pendrive can not copy / paste, flash not detected / not lit, generic flash. Generally, people will panic and do the formatting (but failed). Then they repeated the format process (but failed). Stop the process format to no avail. This will exacerbate the damage
There are 3 Types of Damage Pendrive :
I. Damage to the first (Pendrive Detected but Error):
If the pendrive in the USB and plug it into the still detected Kingstone, but detectable RAW format, capacity 0 bytes, free space 0 bytes or pendrive can be opened but the files in it can not be in the copy, paste and delete.
Solution: (probability of success 95%)
1. If the pendrive is detected "Kingstone, Pqi, Transcend, U3" means, the data in the pendrive still be in the immediate recovery.
2. Download and install software : EASEUS Data Recovery. You can download  Run application EASEUS Data Recovery, then select complete recovery etc. Save file recover to hardisk. Then scan file recover with anti virus.
3. To repair pendrive, Download and install software : HP Drive Key Boot Utility. You can download from : http://www.mediafire.com/?xduh28ejbsosi9i
Information : if your pendrive other brands, please use the following software. Below isis the software to fix pendrive pendrive in accordance with the brand .
- Kingstone = " HP Drive Key Boot Utility " download disini : i This software can use for Kingston 2GB, 4GB, 8GB, 16GB, 32GB and more.
- PQI = " Dr.UFDv1.0.0408.0(12) " download disini : http://www.mediafire.com/?019s382x3u919o2
- Transcend = " JetFlash Recovery Tool v1.0.20 " download disini : http://www.mediafire.com/?ou7cvay7jff2q01
- U3 = " Universal_Customizer " download disini : http://www.mediafire.com/?b2uga9tq42ap2ai
notes:
- For capacities above 4GB pendrive, such as 32GB, when you use the software "HP Drive Key Boot Utility", the capacity will be changed to 4GB pendrive. But you do not need to worry. Please continue the process pendrive format, to restore the original capacity of 32GB.
4. Format pendrive. You can perform the usual format, or through the Administrative Tools, or Download and install software : HP USB Disk Storage Format Tool. You can download from : http://www.mediafire.com/?3h0014fppachw5i. Finish
II. Damage to the second (Generic pendrive):
Generic pendrive means "loss of pendrive firmware". Due to: the occurrence of error handling, in the event of damage to pendrive. When pendrive damaged, the first step we do the format. Because pendrive can not be in the format, we are repeating the format process. Repetition of the formatting that always fails is the cause of the loss of the firmware on the pendrive. Which led to the Generic pendrive.
Solution: (probability of success 40%)
1. Download and install "MBRWiz".
2. Extract the file, and copy the folder "MBRWiz2.0" to the desktop.
3. Press start - run - type "cmd" - type "cd desktop" - write "cd mbrwiz2.0" - write "mbrwiz / list" - (disk = 0 is the hard drive and disk = 1 is the pendrive). write "mbrwiz /disks=1 /repair=1 /ignore" - write "Y" (yes). After that exit from the Command Prompt.
4. Run the program "HP Drive Key Boot Utility".
5. Format pendrive with "HP USB Disk Storage Format Tool"
III. Damage to The third (Pendrive Dead or Undetectable)
Pendrive is not detected by the computer when it is inserted.
Solution: (probability of success 40%)
1. Open the casing pendrive, so it looks components pendrive.
2. Heat up the solder, then you Heat up all the solder on the components pendrive. Be careful not to connect the connector to the IC data and ROM. Make sure you only heat the solder on the components pendrive.
3. If pendrive back to normal, meaning the cause of death pendrive because there is a cracked solder. But if the pendrive is not detected, it means there is a defective component on pendrive